HP DS20L - Manual (Page 39)

Installation and Options 2-11
d. Route the SCSI cable through the notch in the PCI fan bracket
[
. One
end of the SCSI cable was connected to the SCSI backplane in Step 3,
above.
e. Slide the protector on the SCSI cable into the notch
\
on the PCI riser.
f. Push down firmly and squarely on the PCI riser to seat it back in the
motherboard (making sure that the cable remains positioned in the
notch) and secure the two screws to the rear bracket.
g. Connect the end of the SCSI cable to its connector on the PCI riser.
Figure 2-9 Routing SCSI Cable to the PCI Riser
FRONT
FRONT
2
1
3
3
4
5
6
6
5
4
MR0369