HP DS20L - Manual (Page 32)

2-4 AlphaServer DS20L User’s Guide
2.3 Removal from a Rack
If the system is mounted in a rack, refer to Figure 2-3 and follow these
procedures to remove it from the rack in order to open the cover.
1. Remove power from the system.
2. Disconnect all external cables from the system.
3. Loosen the two captive screws
X
that hold the system’s chassis slides to the
rack rails, and lift the system forward and out of the rack.
4. To replace the system in the rack, reverse these steps as necessary.
Figure 2-3 Removing the System from a Rack
DF AlphaS erve r DS20L
MR0365
1
1
FRONT VIEW 1 1
DF AlphaServer DS20L