HP DS20L - Manual (Page 92)

A-4 AlphaServer DS20L User’s Guide
A.3 Command Summary
This section presents a command summary, gives the syntax for the
console commands, and explains the special keystrokes and characters
available in SRM console mode.
Table A–1 Summary of SRM Console Commands
Command Function
boot Loads and starts the operating system.
clear envar Resets an environment variable to its default value.
clear password Sets the password to zero.
continue Resumes program execution.
crash Forces a crash dump at the operating system level.
deposit Writes data to the specified address.
edit Invokes the console line editor on a RAM file or on the
nvram file (power-up script).
examine Displays the contents of a memory location, register, or
device.
halt Halts the specified processor. (Same as stop.)
help Displays information about the specified console
command.
initialize Resets the system to a known state.
lfu Runs the Loadable Firmware Update Utility.
login Turns off secure mode, enabling access to all SRM console
commands during the current session.