HP DS20L - Manual (Page 93)

SRM Console A-5
Table A-1 Summary of SRM Console Commands (continued)
Command Function
more Displays a file one screen at a time.
prcache Utility that initializes and displays status of the
optional PCI NVRAM device.
set envar Sets or modifies the value of an environment
variable.
set host Connects to an MSCP DUP server on a DSSI device.
set password Sets the console password for the first time or
changes an existing password.
set secure Enables secure mode without requiring a restart of
the console.
show envar
Displays the state of the specified environment
variable.
show config Displays the configuration at the last system
initialization.
show cpu Displays the state of each processor in the system.
show device Displays a list of controllers and their devices in the
system.
show ide Displays the internal register setup for the primary
and secondary IDE controllers.
show memory Displays memory module information.
show pal Displays the version of the privileged architecture
library code (PALcode).
show power Displays information about the power supply, system
and PCI fans, CPU fan, and temperature.
show version Displays the version of the console program.
stop Halts the processor. (Same as halt.)
test Runs firmware diagnostics for the system.