HP DS20L - Manual (Page 34)

2-6 AlphaServer DS20L User’s Guide
2.3.2 Memory
Memory may be added to or removed from the AlphaServer DS20L.
Each memory bank has four slots that accept 168-pin PC100 SDRAM PLL
registered/buffered based SPD DIMMs. Memory is supported in a size range
from 512 MB to 2 GB.
There are two DIMM banks designated Bank 0 and Bank 1. The slots are
arranged in an alternating pattern. See Figure 2-5.
2.3.2.1 Memory Configuration Rules
•
A bank must be fully populated; that is, all four slots in a given bank (0 or 1)
must be filled.
•
Bank 0 must be populated first.
•
A bank must use the same type, size, and speed DIMMs. Bank 0 and Bank
1 may have different type, size, and speed of DIMMs from each other,
however.
Figure 2-5 Memory Configuration
Bank 0
Bank 1
MR0096
1
0
1
0
0
1
0
1