HP Vectra VE 5/series 2 - Manual (Page 49)

640 x 480 2 MB
800 x 600 2 MB
1024 x 768 2 MB 4 MB
1280 x 1024 2 MB 4 MB 8 MB
WARNING: Static electricity can damage electronic
components. Turn all equipment OFF. Don’t let
your clothes touch the accessory. Handle the
accessory as little as possible and with care.
To install a video memory module:
1 Disconnect the computer’s power cord and any telecommunications cable.
2 Remove the computer’s cover (see "Removing and Replacing the Cover" earlier in this
chapter).
3 Remove the MGA video adapter from the accessory slot and place it on a static-free flat
surface.
4 Install the memory module on the MGA video adapter.