Hitachi NJI-350B - Manual (Page 261)

Chapter 11 Communication Specifications
11-8
11.6 Connecting to the Ports
The following shows some examples of connections between port 1 and 2 and peripheral units. When creating a
connection cable, check it thoroughly in advance according to what the purpose of its use is.
11.6.1 Port 1
Port 1 of the MICRO-EH is a communication port that uses the RS-232C protocol as interface. It is also a dedicated port
with which to perform communication by the H series dedicated procedure (high protocol). Table 11.8 lists the types of
peripheral units and cables that can be connected to port 1.
Table 11.8 Peripheral unit connection configuration
Peripheral unit Cable CPU type
28-/23-point type
GPCL01H
(Ladder Editor, HI-Ladder)
GPCB02H
EH-RS05
14-point type
Ladder Editor (DOS version)
PCCB02H
EH-RS05
WPCB02H (PC9800)
WVCB02H
(DOS/V system)
EH-RS05
Ladder Editor for Windows®
EH-VCB02 (DOS/V system)
WVCB02H
EH-RS05
Pro-H
EH-VCB02
28-/23-point type
14-point type
10-point type
*1: Set the DIP switches to 19.2 kbps when connecting to a GPCL01H.
*2: Adjust the DIP switch settings to the speed with which to communicate when connecting a LADDER EDITOR or
Pro-H. (The speed is fixed at 4800 bps for 10-point type CPU.)