HP STORAGEWORKS SSL1016 - Manual (Page 95)

Autoloader Operation
95 SSL1016 Tape Autoloader Reference Guide
View Ethernet Information
To view Ethernet information:
1. On the main menu, scroll to Status. (See Figure 61 .)
2. Press Enter.
3. On the Status submenu, scroll to Ethernet Info. (See Figure 62 .)
4. Press Enter.
A list of messages similar to the following screen appears.
Figure 71: View Ethernet information
Run Inventory
The autoloader provides a method to keep track of the cartridges currently loaded
in the magazines. If your autoloader is equipped with a barcode reader, it can scan
the cartridge barcode labels and store the data in its non-volatile memory.
The autoloader automatically runs an inventory whenever you power it on or
insert a magazine.
To take inventory:
1. On the main menu, scroll to Commands.
2. Press Enter.
Table 12: Ethernet Information Messages
Mac Address Indicates the serial number of your Ethernet card.
IP Address The number indicates the static IP address or the
currently assigned dynamic IP address.
Network Indicates whether or not the autoloader is connected to
the network.
MAC address:
00-e0-9e-03-0e-39
IP Address
16.116.76.46
Network: Disconnected