HP STORAGEWORKS SSL1016 - Manual (Page 48)

Installation and Configuration
48 SSL1016 Tape Autoloader Reference Guide
To set a dynamic IP address:
1. On the main menu, scroll to Configuration.
Figure 25: Main menu
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet.
Figure 26: Select Ethernet
4. Press Enter.
5. On the Ethernet submenu, scroll to Set IP.
Figure 27: Set IP
6. Press Enter.
7. Scroll to Dynamic (DHCP).
Figure 28: Set Dynamic IP
8. Press Enter.
Status
Commands
Configuration
Diagnostics
SCSI ID
Ethernet
Time
Change Mode
Set IP
Set Subnet Mask
Set Gateway
Set SNMP Server
Dynamic
3 Static IP
016.117.076.045