Specifications, Physical specifications, Performance specifications – HP STORAGEWORKS SSL1016 User Manual
Page 147: C specifications, Physical specifications performance specifications
147
SSL1016 Tape Autoloader Reference Guide
C
Specifications
Physical Specifications
Performance Specifications
Table 16: Physical Specifications
Height
3.5 inches (8.89 cm)
Width
17.6 inches (44.70 cm)
Length
27.67 inches (70.28 cm)
Weight (without media) 50 lb (22.68 kg)
Table 17: Performance Specifications
Initialize element status
90 seconds (typical)
Mean cartridge cycle time
20 seconds
Mean cartridge load time
10 seconds
Avg load time (after placing cartridge
in drive)
59 seconds (typical)
Max transfer rate
DLT1: 3 MB/sec (native)
SDLT 320: 16 MB/sec (native)
Ultrium 460: 30 MB/sec (native)
Maximum Storage Capacity
DLT1: 1280 GB (compressed)
SDLT 320: 5120 GB (compressed)
Ultrium 460: 6400 GB (compressed)
Note:
Assumes typical 2:1 compression
of data. Actual compression may vary,
depending on type of data being
backed up.