HP STORAGEWORKS SSL1016 - Manual (Page 52)

Installation and Configuration
52 SSL1016 Tape Autoloader Reference Guide
7. At each position of the server address, scroll to the correct number and press
Enter to advance your cursor.
Figure 31: Setting the SNMP server address
Note: Use the Escape key to backspace to a previous text box, if necessary.
When you have set the server address, the autoloader displays Enter to save.
8. Press Enter.
SNMP Server changed to appears on the LCD. You do not need to reboot the
autoloader.
9. Press Escape or Enter to return to the Ethernet submenu.
Time Server
You can connect the autoloader to a server that will supply the correct date and
time using Simple Network Time Protocol (SNTP). The autoloader uses this
information to time stamp information in its memory.
To set a time server:
1. On the main menu, scroll to Configuration. (See Figure 25 .)
2. Press Enter.
3. On the Configuration submenu, scroll to Ethernet. (See Figure 26 .)
4. Press Enter.
5. On the Ethernet submenu, scroll to Set Time Server. (See Figure 27 .)
6. Press Enter.
SNMP Server:
255.255.255.255