Installing a magazine – HP STORAGEWORKS SSL1016 User Manual

Page 83

Autoloader Operation

Installing a Magazine

To install a magazine:

Note:

Be sure you are using the proper magazine for your autoloader. DLT/SDLT

magazines are not compatible with the SSL1016 Ultrium 460 Autoloader. Ultrium

magazines are not compatible with the SSL1016 DLT1 Autoloader or the SSL10106

SDLT 320 Autoloader.

1. Grasp the magazine by the handle with one hand and support it underneath

with the other hand.

2. Slide the magazine into the magazine bay. Make sure you position the

magazine correctly; it should slide smoothly.

Caution:

Be sure that you install only a left-oriented magazine in the left bay

and a right-oriented magazine in the right bay.

Figure 55: Installing a magazine

3. The magazine is correctly installed when you feel it click into place and the

front is flush with the front panel. Left Mag Inserted or Right Mag Inserted
appears on the LCD.