HP STORAGEWORKS SSL1016 - Manual (Page 109)

Autoloader Operation
109 SSL1016 Tape Autoloader Reference Guide
Set the Compression
Note: Typically you will want to leave this option enabled unless you are backing up
data that is already compressed. Attempting to compress compressed data can reduce
performance and increase data size.
To set the compression:
1. On any Web Administration page, click Configurations.
2. If a checkmark appears in the box next to Compression, compression is
enabled. To disable compression, click the box to remove the checkmark.
3. If no checkmark appears in the box next to Compression, compression is
disabled. To enable compression, click the box to enter a checkmark.
4. Click submit.
Figure 83: Setting the compression