HP STORAGEWORKS SSL1016 - Manual (Page 115)

Autoloader Operation
115 SSL1016 Tape Autoloader Reference Guide
Set Security Option
When you enable the security option, users must enter a password to access the
autoloader’s functionality. A password allows either administrator-level access or
operator-level access. (For more information on levels of password-protection, see
“Security.”)
To set the security option:
1. On any Web Administration page, click Configurations.
2. On the secondary menu, click Security.
Figure 87: Security option
3. If a checkmark appears in the box next to Security, the security option is
enabled. To disable the security option, click the box to remove the
checkmark. If no checkmark appears in the box next to Security, the security
option is disabled. To enable the security option, click the box to enter a
checkmark.
4. Click submit.