HP STORAGEWORKS SSL1016 - Manual (Page 90)

Autoloader Operation
90 SSL1016 Tape Autoloader Reference Guide
A list of messages similar to the following screen appears.
Figure 64: Autoloader status message
Table 8: Autoloader Status Messages
Magazine
L= ❋ The left magazine is present.
R= ❋ The right magazine is present.
L= (no ❋ ) The left magazine is not present.
R= (no ❋ ) The right magazine is not present.
Loader
ONLINE The autoloader SCSI connection is active.
OFFLINE The autoloader SCSI connection is not active.
Drive
ONLINE The drive SCSI connection is active.
OFFLINE The drive SCSI connection is not active.
Mode
Random Default. The autoloader is operating in Random mode.
Mixed The autoloader is operating in Mixed mode.
Sequential The autoloader is operating in Sequential mode.
Seq Cycle Mode The autoloader is operating in Seq Cycle Mode.
NOTE: ISVs support different modes of operation. Be sure your autoloader is set to the
correct mode of operation. The autoloader defaults to Random mode. See “Control
Mode” in Chapter 2 for additional information.
Barcode Reader
❋ A barcode reader is present.
No ❋ A barcode reader is not present.
Magazines: L ❋ R ❋
Loader: ONLINE
Drive: ONLINE
Mode: Mixed
Barcode Reader: ❋