HP STORAGEWORKS SSL1016 - Manual (Page 31)

Installation and Configuration
31 SSL1016 Tape Autoloader Reference Guide
7. Attach one U-channel bracket to each rear rail of the rack, loosely installing
the screws through the clipnuts. (Attach the side of the bracket with only two
holes.) Do not tighten the screws.
Figure 10: Attaching the U-channel brackets to the rack
8. Position the autoloader in the rack so that each support bracket rests on a
U-channel bracket. Each support bracket slides along the lip of the U-channel
bracket.
Figure 11: Positioning the autoloader in the rack