HP STORAGEWORKS SSL1016 - Manual (Page 114)

Autoloader Operation
114 SSL1016 Tape Autoloader Reference Guide
5. To set the IP address from a permanent address to a dynamic address, click the
box next to DHCP, and delete the IP address from the IP address fields.
6. To change the IP address of the subnet mask, gateway, SNMP server, or the
time server:
a. Click the box to left of the address you want to change to enter a
checkmark.
b. Type in the new address, using your Tab key to move from box to box.
7. Click submit.
Note: If the preceding steps change the IP address, the new address must be entered
into the browser to continue using the Web Administration feature.