HP STORAGEWORKS SSL1016 - Manual (Page 101)

Autoloader Operation
101 SSL1016 Tape Autoloader Reference Guide
View Status Information
To view status information from Web Administration, you only have to open it.
You do not need to execute any command to see it because the status information
appears on the right side of every page. This information is updated automatically
every 10 seconds, so the status you see is real-time information.
Move Tapes
To move a tape:
1. On any Web Administration page, click Commands.
2. From the drop-down menu under Move tape from:, select the current location
of the tape you want to move.
Note: You can also click the slot on the graphic to select it.
3. From the drop-down menu under To:, select the location to which you want to
move the tape.
4. Click submit.