HP 8080 ELITE BUSINESS - Manual (Page 74)

Hood Sensor
The hood sensor is located on the top of the rear chassis panel.
1. Prepare the computer for disassembly ( Preparation for Disassembly on page 31 ).
2. Remove the computer access panel ( Computer Access Panel on page 34 ).
3. Unplug the hood sensor cable from the white connector labeled HSENSE on the system board
(1).
4. Slide the hood sensor straight out of the slot in the chassis (2).
Figure 5-36 Removing the hood sensor
To reinstall the hood sensor, reverse the removal procedure.
62 Chapter 5 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis