Cable connections, Drives, Drive positions – HP 8080 ELITE BUSINESS User Manual
Page 120

Cable Connections
System board connectors are color-coded to make it easier to find the proper connection.
System Board Connector
Connector Color
Description
P1
White
Power supply, 6-pin
PWRCPU
White
Power supply, 4-pin
SATA PWR1
Black
ODD power connector
SATA PWR2
Black
HDD power connector
CHFAN
Brown
Chassis fan
PB/LED
Black
Front power button/LED
FRONT USB1
Yellow
Front I/O USB
FRONT USB2
Green
Front I/O USB
FRONT AUD
Blue
Front audio
SPKR
White
Internal speaker
COMB
Black
Serial port
HLOCK
Black
Hood lock solenoid
HSENSE
White
Hood sensor
MEDIA
Black
Media card reader
PAR
Black
Flying parallel port header
Drives
A Torx T-15 screwdriver is needed to remove and install the guide screws on a drive.
CAUTION:
Make sure personal files on the hard drive are backed up to an external storage device
before removing the hard drive. Failure to do so will result in data loss. After replacing the primary
hard drive, you will need to run the Restore Plus! CD to load the HP factory-installed files.
Drive Positions
Figure 6-24
Drive Positions
108 Chapter 6 Removal and Replacement Procedures Small Form Factor (SFF) Chassis