HP 8080 ELITE BUSINESS - Manual (Page 206)

Control panel message Description Recommended action
2200-PMM Allocation Error during MEBx
Download Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM. 1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the
computer, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the system
board.
2201-MEBx Module did not checksum
correctly Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM. 1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the system
board.
2202-PMM Deallocation Error during MEBx
cleanup Memory error during POST execution of the
Management Engine (ME) BIOS Extensions
option ROM. 1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the system
board.
2203-Setup error during MEBx execution MEBx selection or exit resulted in a setup
failure. 1. Reboot the computer.
2. Unplug the power cord, re-seat the
memory modules, and reboot the
computer.
3. If the memory configuration was
recently changed, unplug the power
cord, restore the original memory
configuration, and reboot the
computer.
4. If the error persists, replace the system
board.
Table C-1 Numeric Codes and Text Messages (continued)
194 Appendix C POST Error Messages