HP 3200m - Manual (Page 195)

EN Resolving image quality problems
193
Blank pages
If blank pages print occasionally:
1
If you are printing on media that has small dimensions and your
page is blank, try printing on larger media to see where the image
is printing. Adjust the margins accordingly.
2
Remove the paper from the paper input tray and align the edges
of the paper. “Break” the ream of paper by curving it into an
upside-down u-shape; this might decrease multifeeds. Try turning
the paper around to feed the other end first.
3
Check your software’s printing configuration information. If you
are using a word-processing program, check to see if a natural
page break and a forced page break are close to each other.
If blank pages are always printing:
1
Make sure you removed the entire length of the sealing tape from
the toner cartridge before you installed it.
2
Replace the toner cartridge.
3
Print a self-test page.
Wrinkles or creases
1
Print a few more pages to see if the problem corrects itself.
2
Make sure that the environmental specifications for the printer
are maintained.
3
Turn over the stack of paper in the tray. Also, try rotating the
paper 180
° .
4
Make sure the media is loaded correctly, all adjustments have
been made, and the media is under the corner tabs (see “Loading
print media to be faxed, copied, or scanned” on page 26).