Hitachi L100 - Manual (Page 155)

Parameter Settings for DOP/DRW/DOP Plus
Appendi
x B
B–8
Function Mode Setup
Mon. Alarm display ERR1 Under.V ERR1 Under.V
ERR1 10.0Hz ERR1 10.0Hz
ERR1 0.2A ERR1 0.2A
ERR1 189.8Vdc ERR1 189.8Vdc
ERR1 RUN 000003H ERR1 RUN 000003H
Total alarm count ERROR COUNT 002 ERROR COUNT 002
Trip history, previous
alarm (example) ERR2 Under.V ERR2 Under.V
ERR2 10.0Hz ERR2 10.0Hz
ERR2 0.2A ERR2 0.2A
ERR2 189.8Vdc ERR2 189.8Vdc
ERR2 RUN 000003H ERR2 RUN 000003H
Trip history, 2nd
previous alarm ERR3 # ERR3 #
Monitor Mode Setup Displayed Default Setting
User Setting
Func.
Code
Name -FE (Europe) -FU (USA)
Function Mode Setup Displayed Default Setting
User Setting
Func.
Code
Name -FE (Europe) -FU (USA)
F-00 Base frequency setting F-BASE 050Hz F-BASE 060Hz
F-01 Maximum frequency
setting F-MAX 050Hz F-MAX 060Hz
F-02 Start frequency adjust-
ment Fmin 0.5Hz Fmin 0.5Hz
F-03 Motor input voltage AVR AC 230V AVR AC 230V
AVR function for decel-
eration AVR MODE DOFF AVR MODE DOFF
F-04 Control method setting CONTROL VC CONTROL VC
F-06 Acceleration time 1 ACC 1 0010.0s ACC 1 0010.0s
2-stage acceleration time ACC CHG TM ACC CHG TM
Acceleration time 2 ACC 2 0015.0s ACC 2 0015.0s
Acceleration time
change frequency ACC CHFr 000.0Hz ACC CHFr 000.0Hz
Acceleration curve
selection ACC LINE L ACC LINE L
Technologies Inc.
Toll Free: voice: 1-877-539-2542 fax: 1-800-539-2542 www.mgitech.com