HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 201)

Problem Resolution 5Ć26
Table 5-2. HP FAX-700 and FAX-750 Service Parameters (continued)
Service
Parameter
Number
Display
Indication
Parameter
Description
Settings Current
Setting
Standard
Setting
60 TCF ON Protocol setting 01: 0.4 s
02: 0.6 s
03: 0.8 s
04: 1.0 s*
05: 1.2 s
06: 1.4 s 4 4
61 TCF
THRESHOLD Protocol setting 01: 100%*
02: 98%
03: 96%
04: 94%
05: 92%
06: 90%
07: 88%
08: 86% 1 1
62 NOT USED
63 2400 HAND-
SHAKE Selects whether or not to
activate 2400 BPS hand-
shaking 0: off* / 1: on 0 0
64 SILENT
DETECT TH This is the threshold level
for silent detection. It can
be adjusted down if sig-
nal levels are low on the
line, so that the machine
detects silence when
someone is actually leav-
ing a message on the
TAM. It can be adjusted
up if the line is noisy the
the machine never de-
tects silence 01: –33 dBm...
16: –48 dBm
11 11
65 NO CARRIER
DELAY During reception if image
data is being received
and the signal is lost,
then this is the timeout
after which the machine
will disconnect. 6 s not
required by CCITT, but
specified by German reg-
ulations 01: 2 s
02: 6 s*
2 2
66 NO FRAME
DELAY Default may change to
Setting 02, 4 min 01: 1 min*
02: 4 min
1 1
67 COM STOP Selects between printing
a transaction report or
not printing a transaction
report when the Stop
button is pressed during
transmission 0: off* / 1: on 0 0