HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 158)

Optimization 4Ć24
To Delete a File on the HP FAX-900 or FAX-950
You can obtain a print out of the file numbers in memory by performing the file list print procedure given earlier in this
chapter.
To delete a file, press the buttons in the sequence shown and enter the necessary information where requested.
Menu
→
9
→
Set
→
Enter file number to be deleted
→ →
Set
3
→
To Print the Communication Settings of a File on the HP FAX-900 or FAX-950
You can print the current communications settings for a specific file stored in memory. The document file number, date
and time stored, start time (for deferred functions), destination station, logo and ID number are listed.
You can obtain a print out of the file numbers in memory by performing the file list print procedure given earlier in this
chapter.
The document will remain in memory after the file is printed.
To print the communications settings of a file, press the buttons in the sequence shown.
Menu
→
9
→
Set
→
Enter file number to be printed
→ →
Set
4
→
Sending to Multiple Stations (Broadcasting)
Sending to Multiple Stations (Broadcasting) on the HP FAX-700 and FAX-750
Your HP FAX-700 and HP FAX-750 have the memory capacity to store approximately 12 document pages which can
be transmitted from memory automatically. You can send a document stored in memory to one or more stations using
any of the dialing methods. Direct dialing is limited to three stations per transmission. Speed dialing requires your
two-digit speed-dial code(s). One-touch dialing requires pressing a one-touch number for each station.