HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 110)

Operation and Usage 3Ć38
Table 3-4. Reception Modes on the HP FAX-900 and FAX-950
Attended Mode
(requires user action)
Unattended Mode
Receive
Mode
Conditions
Normally receive
only voice
calls.
Normally receive
voice and fax calls.
Normally receive
only fax calls.
Normally receive
voice and fax calls
and a telephone
answering machine
is connected.
Suggested
Reception
Mode
Telephone
mode
All calls must be
manually anĆ
swered.
If a fax call, you reĆ
ceive the fax after
talking with the
sender, pressing
the fax Start" butĆ
ton, and hanging
up.
Fax/Tel Auto
switch mode (Not
used in France or
Germany).
Fax calls are autoĆ
matically received.
If the call is a voice
call, the fax maĆ
chine will beep".
Pick up the teleĆ
phone, press the
fax Dial/Space"
button, and start to
talk.
Fax mode
The fax machine
picks up the line afĆ
ter it detects 2 rings
and sends a fax
tone to the calling
fax machine to start
the fax transaction
TAM Interface
mode (TAM I/F)
(Not used in
France).
If the call is a fax
call, the fax maĆ
chine takes over
the call to receive
the fax.
If the call is a voice
call, the answering
machine will autoĆ
matically receive
the call.
Settings Receive mode butĆ
ton OFF, lamp is
OFF.
Receive mode butĆ
ton lamp is OFF.
Change fax paramĆ
eter 15 to option 2:
Fax/Tel SW.
Receive mode butĆ
ton lamp is ON.
Receive mode butĆ
ton lamp is ON.
Change fax paramĆ
eter 16 to option 2:
TAM I/F.
Unattended Modes
Fax mode reception is one of the two unattended modes of receiving. In this mode, all incoming calls are treated as
fax calls. For voice calls, the calling party will hear the fax signal from your machine, indicating that they can send a
fax to you. When a fax call is received, your fax machine answers and tries to detect the fax signal. If a fax signal is
detected, it sends a signal to the calling fax machine, indicating that it is ready to receive. The fax is then sent and your
machine starts to automatically receive the fax.
To use fax mode reception, make sure the Receive mode button is set to ON (the lamp is lit) and you do not have any
document in the automatic document feeder of your fax machine.
Fax mode reception is the factory setting at shipment. If the parameter setting was changed and you want to use Fax
mode reception, you need to set fax parameter 16 to option 1 (Fax). Press the buttons in the sequence shown.
Menu
→
7
→
Set
→
→
Stop Set
→
4
→
Set
→
1
→
6
→
1
→