HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 118)

Operation and Usage 3Ć46
Copying a Document
Copying a Document on the HP FAX-700 and FAX-750
To copy a document, press the buttons in the sequence shown and enter the necessary information where requested.
Use the numeric keypad to enter the number of copies to be printed.
Start/Copy
→ Enter Number
of Copies (1 to 99) →
Start
Load Document
(face down)
→
Copying a Document on the HP FAX-900 and FAX-950
The HP FAX-900 can produce copies of documents. You can make a test copy of your document prior to sending it.
Your fax machine automatically selects Fine Resolution when making a copy. This will allow you to see what the
document will probably look like at the receiving station.
The reduction ratio of the copy is dependent upon the setting you have for fax parameter 25. To disable the reduction
ratio, set fax parameter 32 (copy reduction) to option 1 (invalid). Fax parameters are presented in chapter 4.
To copy a document, load the document (face down) into the automatic document feeder and press the Copy button,
enter the number of copies (1 – 99) to make, and press the Start button.
→
Copy
→ Enter number of copies
to make (1 to 99) →
Start
The message, “NO. OF COPIES= ” will appear on the LCD. Enter the number of copies you want and press the Start
button. The HP fax machine will then store the document in memory and print the number of copies you entered.