HP FACSIMILE MACHINE HP FAX-700 - Manual (Page 200)

Problem Resolution 5Ć25
Table 5-2. HP FAX-700 and FAX-750 Service Parameters (continued)
Service
Parameter
Number
Display
Indication
Parameter
Description
Settings Current
Setting
Standard
Setting
51 FALLBACK
40 ms When this parameter is
switched on and docu-
ment memory is full, the
machine indicates to the
calling fax machine that
the minimum scan time
per line is 40 ms. This
action slows down the
sending rate of the call-
ing machine 0:off* / 1:on 0 0
52 ECM T5 TIMER Protocol timer T5 setting 01: 1 min*
02: 4 min
1 1
53 EOL COUNT Sets how many EOLs
must be received to indi-
cate an RTC 2...6 piece 4 4
54 XMT CRP CMD Selects whether or not to
transmit the Command
Repeat command 0:off* / 1:on 0 0
55 SHORT
PREAMBLE Selects whether or not
the protocol preamble will
be short 0:off* / 1:on 0 0
56 PREAMBLE
TIME 700/750 to 700/750 NSF
(non-standard facilities)
preamble transmission
time. This is shorter the
the normal CCITT speci-
fication making NSF
transmission faster 01: 200 ms
02: 300 ms
03: 400 ms
04: 500 ms*
4 4
57 SHORT TCF Selects whether or not
the Transfer Confirm sig-
nal will be short 0:off* / 1:on 0 0
58 CFR TO IMAGE
TIME Time between receiving
CFR and sending image 01: 75 ms
02: 150 ms
03: 225 ms
04: 300 ms
05: 400 ms
06: 450 ms*
07: 525 ms
08: 600 ms 6 6
59 TCF OFF Protocol signal setting 01: 0.1 s
02: 0.2 s
03: 0.3 s*
04: 0.4 s
05: 0.5 s 3 3