Epson 4003353 - Manual (Page 95)

Adjustment
Stylus Color Service Manual
9.
10.
11.
Rerun the BASIC program and choose the “Head Angle Confirmation Pattern” by entering “2”
from the keyboard, then verify that the confirmation sample is correct.
I II
Carriage Unit
Color Head
u [ I
Base Head
I t
Figure 4-17. Spacer Angular Replacement Method(YMC)
If the sample is incorrect, repeat steps 5-9 until the upper sample lines are aligned with one
another and the lower sample lines are exactly equidistant between one another (as shown at
B in Figure 4-15).
When you complete this adjustment, turn off the printer.
Rev. D
4-15 I