Epson 4003353 - Manual (Page 22)

Product
1.4.3 Default Settings
The printer can save some printer setting parameters that define its functions at You
can change these parameters by using the printer’s default setting mode.
1.4.3.1 Default Setting Items
You can use the setting mode to change the settings listed in the table below. Activate the
default-setting mode by holding down the Economy/Condensed button while turning on the
printer.
Table 1-12. Default Setting Items
Menu
Contents
Character table
Print direction
Network l/F mode
Auto line feed
Loading position
Interface mode
Auto l/F wait mode
Description
Selects the character table
Controls the print direction. (See Tables 1-12 and 1-13)
Auto
Off: For normal environments.
On: For network environments.
On: Valid
Off: Invalid
3.0/8.5 mm (0.12/0.33 in.)
Auto mode
Parallel l/F mode
l/F mode
Optional l/F mode
1 0/30 seconds
Table 1-13. Characteristics of Print Direction Mode
off
3.0 mm
10 sec.
ttem
I
Black and White Printing
I Color Printing
Throughput and quality is
Throughput is better.
Auto
better.
Color quality with special paper is
(Color correction depends on the printing direction.)
Throughput is best.
Throughput is better.
Print quality may be down.
Color quality with special paper is worse.
(Color correction depends on the printing direction.)
Throughput is worse. Throughput is worse.
Print quality is better. Color quality is best.
Table Printing Direction and U Command
Auto
None None None
Character mode
(for
Auto Auto Auto
Raster graphics
mode
Auto
)
Note: Printing is
Rev. A