Epson 4003353 - Manual (Page 87)

Adjustments Stylus Color
7.
8.
9.
Turn the printer power off at once.
Move the carriage to the center
pressing the carriage lock lever, and remove
the two ink cartridges.
Remove the rubber cap that covering a head screwat a side of color inkcartridge and then
do not remove) three screws. (Refer to figure 4-6.)
Figure 4-6. Removing the Rubber Cap
replacing the always install new ink cartridges before returning the
the user. At this time, use the ink cartridges that are exclusive for (Monochrome:
1020626, CMY: 1020627). You can the old ink cartridges for other
10. Change the spacer monochrome head) to new one with referring the figure 47.
(Replace spacer angular while using the tweezers to push the base head toward the rear.)
Rev. D
4-7