Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder - Manual (Page 312)

Specifications
INPUT1 - 8 Connectors XLR/TRS combo jacks (XLR: 2 hot, TRS:
TIP hot)
Input gain +10 – +75 dB
Input impedance 3 kΩ or more
Maximum input level +4 dBu (at 0 dBFS)
Input source set to
“Mic”
(→ Setting the input
source (Input Source) )
Phantom power +24/+48 V, 10 mA maximum per
channel
Input gain −10 – +55 dB
Input impedance 5 kΩ or more
Input source set to
“Line”
(→ Setting the input
source (Input Source) )
Maximum input level +24 dBu (at 0 dBFS)
Equivalent input noise −127 dBu or less (A-weighted, +75 dB
input gain, 150 Ω input)
Frequency response 20 Hz – 60 kHz, +0.5 dB/−1 kHz (192
kHz sample rate)
A/D dynamic range 113 dB typ. (−60 dBFS input, A-
weighted)
Crosstalk −90 dB or less (between adjacent
channels, 1 kHz)
MIC IN ZOOM mic capsule input (use disables
Inputs 1/2)
Inputs
SLATE MIC Built-in mic for voice memos can be
assigned to tracks freely
Connectors TA3 connectors (balanced output, 2:
hot)
Output impedance 150 Ω or less
Reference output level −10 dBV (normal output level)
+4 dBu (line output level)
1 kHz, 600 Ω load
MAIN OUT 1/2
Maximum output level +10 dBV (normal output level)
+24 dBu (line output level)
1 kHz, 600 Ω load
Connector 3.5 mm stereo mini (unbalanced
output)
Output impedance 100 Ω or less
Outputs
SUB OUT 1/2
Reference output level −10 dBV (normal output level)
−40 dBu (mic output level)
1 kHz, 10 kΩ load
312