Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder - Manual (Page 154)

5.
Use to set how timecode is initialized, and press .
Setting Explanation
Restart Time When the F8n Pro starts, the value set by “Restart” is used to jam the
internal timecode.
(→ Restarting internal timecode with a specified
value )
RTC When the F8n Pro starts, its timecode is restored from the timecode
when the power was turned off and advanced by the elapsed time
using the “Date/Time (RTC)” setting
(→ Setting the date and time
(Date/Time (RTC)) ).
Since RTC is less precise than internal timecode, discrepancies will
occur.
154