Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder - Manual (Page 114)

Setting Explanation
Attack Time
This sets the amount of time until limiting starts after the input signal
exceeds the threshold.
1. Use to adjust the time, and press .
This can be set from 1 to 4 ms.
Release Time
This sets the amount of time until limiting stops after the input signal
goes below the threshold.
1. Use to adjust the time, and press .
This can be set from 1 to 500 ms.
Link
The limiter can be linked or applied separately to MAIN OUT 1 and
MAIN OUT 2, as well as to SUB OUT 1 and SUB OUT 2.
1. Use to select “Off”, and press .
• Off: Separates limiter operation.
• On: Links limiter operation. If the signal for either linked signal
reaches the threshold, the limiter will operate on both channels.
114