Zoom F8n Pro 8-Input / 10-Track Multitrack Field Recorder User Manual
Page 295
5.
Use
to select “Full Test”, and press
.
6.
Use
to select “Yes”, and press
.
The amount of time required for the full test will be shown.
The result of the evaluation will be shown. If the access rate MAX reaches 100%, the card will fail (NG).
NOTE
:
Even if a performance test result is “OK”, there is no guarantee that writing errors will not occur. This
information is just to provide guidance.
HINT:
• You can cancel the test by pressing
during the test.
• You can press
to pause and resume the test.
295