Setting standard user password – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 93
Important
• The following character restrictions apply to the password:
• Set the password by using 4 to 32 characters.
• The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
• For security reasons, we recommend you use 8 and more alphanumeric characters.
7.
When the completion message is displayed, select
OK
.
Setting Standard User Password
Enable the standard user mode and set a standard user password by following the steps below.
1.
Display printer status on web browser.
2.
Select
Security
.
The menus are displayed.
3.
Select
Standard user mode settings
.
4.
When the confirming message is displayed, select
Yes
.
5.
Enter a password, and then select
OK
.
Important
• The following character restrictions apply to the password:
• Set the password by using 4 to 32 characters.
• The allowed characters are single-byte alphanumeric characters, blank space, umlaut
characters, and the below characters.
- ! @ # $ % ^ & * _ ; : , . / ` = + ' " ( ) { } [ ] < > |
• For security reasons, we recommend you use 8 and more alphanumeric characters.
6.
When the completion message is displayed, select
OK
.
93