Set correct printer port. (windows) – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 564
Note
• If multiple printers are registered to your computer, set your printer as default printer to make the one
selected by default.
•
For macOS:
Make sure your printer's name is selected in
Printer
in the Print dialog.
Note
• If multiple printers are registered to your computer, select
Set as Default Printer
from
System
Preferences
>
Printers & Scanners
for a printer to make the one selected by default.
Check11
Set correct printer port. (Windows)
•
For connecting printer to computer using USB cable:
1. Make sure the printer is turned on.
2. Select
Devices and Printers
in the
Control Panel
and right-click the icon of the printer to correct the
printer port.
3. Select
Remove device
, delete the unnecessary printer driver.
4. Unplug the USB cable.
5. Reconnect the USB cable.
The printer driver rebuilding starts and a new printer icon is added.
If the printer icon is not added after about 5 minutes, printer driver is not installed correctly. Redo printer
setup.
•
For connecting printer to the network:
You can perform network settings using IJ Network Device Setup Utility.
1. Start Up IJ Network Device Setup Utility.
Starting Up IJ Network Device Setup Utility
2. Select
Diagnose and Repair
.
Connectable printer detection is performed.
3. Chose the printer that you want to reconnect from the list, and select
Next
.
Select
Next
when the diagnosis result is displayed.
4. Select
Exit
.
Check12
Are you trying to print a large data file? (Windows)
If you are trying to print a large data file, it takes a long time to start printing.
If the printer does not start printing after a certain period of time, select
On
for
Prevention of Print Data Loss
on
the
Print Options
dialog box.
.
Important
• Selecting
On
for
Prevention of Print Data Loss
may reduce print quality.
564