Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 608)

Disable Function to Send Usage Information of Printer
The function to send usage information of the printer is configured or controlled by the printer, computer,
and smartphone/tablet separately. Disable the function from each device as well as the printer.
Important
• Make sure each device is connected to Internet before disabling the function to send usage information.
• If you perform settings to stop sending usage information, you cannot use services, which requires
information on your printer, such as PIXMA/MAXIFY Cloud Link.
• In some case, it may take time for your choice to be reflected in your printer.
For Windows:
For macOS:
For Canon PRINT Inkjet/SELPHY:
For Windows:
Perform setup procedure to change the setting for sending information of the printer.
1. Make sure computer to change setting is connected to Internet.
2. Click here and start setup procedure.
3. Click Start Setup on Start Setup screen.
Proceed the setup procedure according to the instructions on the screen until the For using services
related to Canon product license agreement screen appears.
4. Click Do not agree on For using services related to Canon product license agreement
screen.
The warning screen appears.
5. Click OK on displayed screen.
6. Proceed setup procedure to the end according to instructions on screen.
7. If For using services related to Canon product license agreement screen appears
again after a certain period of time, click Do not agree .
608