Checking network setting difference – Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 206
Checking Network Setting Difference
If you cannot use a printer you used on the network before, compare the current network status with that
when you could use the printer and check the difference.
1.
Start up IJ Network Device Setup Utility.
2.
Check the displayed message and select
Yes
.
3.
Select
Printer Network Setup
on the displayed screen.
Detected printers are listed.
4.
Select printer with
Unknown
or
Not Set
displayed on
Status
from printer list.
5.
Select
Check Connection Status
on
View
menu.
The screen below appears.
If the network status when you used the printer is different from the current status,
Mismatch
appears on
Status
and the items are displayed in red. Check the red items.
6.
Click
OK
to close screen.
Performing Network Settings via USB Connection
When the
Check Connection Status
screen is displayed, you can perform printer network setup by
connecting the printer and computer using a USB cable. Follow the procedure below.
206