Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 55)

Important
• If the LAN is disabled, the following items can not be selected.
◦ Set printer name
Specifies the printer name. You can use 2 to 15 characters for the name.
Note
• You cannot use the same printer name as that already used for other LAN connected devices.
• You cannot use a hyphen for the initial or last character of the printer name.
◦ TCP/IP settings
Performs IPv4 or IPv6 setting.
◦ WSD settings
Setting items when you use WSD (one of the network protocols supported in Windows 10, Windows
8.1, and Windows 7).
◾ Enable/disable WSD
Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in
Windows 10, Windows 8.1, and Windows 7.
◾ Optimize inbound WSD
Selecting Enable allows you to receive the WSD printing data faster.
◾ Timeout settings
Specifies the timeout length.
◦ Bonjour settings
Setting items when you use Bonjour.
◾ Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
◾ Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected
devices.
◦ IEEE802.1X settings
Sets the IEEE802.1X authentication method, etc.
◦ LPR protocol settings
Enables/Disables the LPR setting.
◦ RAW protocol
55