Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer User Manual
Page 104
Generating Server Certificate (Self-signed Certificate)
When you use SSL connection via IPv6 network, you need to generate an IPv6 server certificate using the
printer.
Generate the server certificate from Remote UI.
Follow the procedure below.
Step1
Step2
Step3
Checking Generated Server Certificate
Important
• If you generate an IPv6 server certificate, you cannot use SSL communication via IPv4. In addition, a
warning message may appear if you are using Remote UI.
To reset the IPv6 server certificate, operate in the following order from the Remote UI.
Security
>
SSL/TLS settings
>
Delete key and certificate
>
OK
Checking Printer's IP Address
1.
Check that printer is turned on.
2.
Display the HOME screen.
If the HOME screen is not displayed, select the
HOME
button.
3.
Use the
buttons to select
LAN settings
and press the
OK
button.
4.
Use the
buttons to select the enabled LAN and press the
OK
button.
Diagonal lines are displayed for disabled LAN icons.
5.
Use the
buttons to check the value on
IPv6 link-local address
.
Write down the value on
IPv6 link-local address
for your reference when you open Remote UI and
generate a server certificate.
104