Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 78)

Updating Media Information in Printer Driver
This function gets the latest media information from the printer and updates the media information in the
printer driver.
When the media information is updated, the media displayed for
Media Type on the Main tab is updated to
the latest information.
The procedure for updating media information is described below.
Update Media Information
1. Open printer driver setup screen
2. On Maintenance tab, click Update Media Information
The Update Media Information dialog box appears.
When media information on the driver cannot be successfully updated, click Initial Check Items and
check the content that is displayed.
3. Check that the media information has updated
By following the dialog instructions, check that the printer is on, and then click Execute .
After checking whether or not the printer media information needs to be updated, a message will be
displayed.
If the printer media information is up to date, click
OK and finish updating media information.
If the information needs to be updated, follow the below steps to do so:
4. Update media information
When a confirmation message appears, click OK .
The printer driver media information will update.
Important
• It may take some time to update the media information.
5. Finish updating media information
When a confirmation message appears, click OK .
The media information will be updated.
Important
• Restart the printer driver after updating media information.
78