Canon imagePROGRAF PRO-300 13" Photographic Inkjet Printer - Manual (Page 331)

The printer will now print using these settings.
Important
• If you are performing large-format printing, make sure that the ink tank has plenty of remaining ink.
• When you select the
Always Print with Current Settings check box, all settings specified on the
Quick Setup , Main , and Page Setup tabs are saved, and you can print with the same settings from the
next time as well.
• To register the current settings as a new preset, click Save... under Commonly Used Settings .
• To print by using the manual feed tray, perform the operation according to the instructions displayed on
the screen.
Note
• If the paper settings in the printer driver differ from the paper information registered on the printer, an
error may occur. For instructions on what to do if an error occurs, see " Register Paper Information ."
For details about the paper information to be registered on the printer, see the following:
• Paper Settings on the Printer Driver and the Printer (Media Type)
• Paper Settings on the Printer Driver and the Printer (Paper Size)
• When you set Matte Photo Paper , Premium Fine Art Smooth , Premium Fine Art Rough or Photo
Paper Pro Premium Matte A in the printer driver, we recommend that you set Printer Paper Size to
4"x6" 10x15cm , L 89x127mm , or "XXX (Margin 25)" in the printer driver.
When a page size other than "XXX (Margin 25)" is selected, an error message may appear.
Select one of the page sizes in the displayed dialog box, or go to the
Page Setup tab, display the Print
Options dialog box, and change the Cancel the safety margin regulation for paper size setting.
331