DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 97)

DJI Mini 4 Pro User Manual
© 2023 DJI All Rights Reserved.
97
Settings
Safety
• Flight Assistance
Obstacle Avoidance
Action Omnidirectional vision system is enabled after setting Obstacle
Avoidance Action to Bypass or Brake. The aircraft cannot sense
obstacles if Obstacle Avoidance is disabled.
Bypassing Options Select Normal or Nifty mode when using Bypass.
Display Radar Map When enabled, the real-time obstacle detection radar map will be
displayed.
• Return to Home (RTH): set Advanced RTH, Auto RTH Altitude, and to update the Home Point.
• AR Settings: enable display of AR Home Point, AR RTH Route, and AR Aircraft Shadow.
• Flight Protection: set the max altitude and the max distance for flights.
• Sensors: tap to view the IMU and compass statuses and start calibration if necessary.
• Battery: tap to view battery information such as battery cell status, serial number, and
number of times charged.
• Auxiliary LED: tap to set the auxiliary LED to auto, on, or off. DO NOT turn on the Auxiliary
LED before takeoff.
• Unlock GEO Zone: tap to view information about unlocking GEO Zones.
• Find My Drone: this feature helps to find the location of the aircraft, either by enabling the
21. Back
: tap to return to the home screen.
Screen Shortcuts
Gimbal Angle Adjustment
Press and hold on the screen to bring up the gimbal adjustment bar and adjust the gimbal
angle.
Focus/Spot Metering
Tap on the screen to enable focus or spot metering. Focus or spot metering will display
differently depending on the shooting mode, focus mode, exposure mode, and spot metering
mode.
After using spot metering:
• Drag next to the box up and down to adjust the EV (exposure value).
• Press and hold the box on the screen to lock the exposure. To unlock the exposure, tap and
hold on the screen again or tap on another area of the screen.