DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 61)

DJI Mini 4 Pro User Manual
© 2023 DJI All Rights Reserved.
61
Flight Recorder
Flight data including flight telemetry, aircraft status information, and other parameters are
automatically saved to the internal data recorder of the aircraft. The data can be accessed using
DJI Assistant 2 (Consumer Drones Series).
Propellers
There are two types of propellers, which are designed to spin in different directions. Marks are
used to indicate which propellers should be attached to which motors. Make sure to match the
propellers and motors by following the instructions.
Propellers Marked Unmarked
Illustration
Mounting Position
Attach to the motors of the marked
arm Attach to the motors of the
unmarked arm
Attaching the propellers
Attach the marked propellers to the motors of the marked arm, and the unmarked propellers to
the motors of the unmarked arm. Use the screwdriver from the aircraft package to mount the
propellers. Make sure the propellers are secure.
• Make sure to only use the screwdriver from the aircraft package for mounting
propellers. Using other screwdrivers may damage the screws.
• Make sure to keep the screws vertical while tightening them. The screws should not be
at a tilted angle to the mounting surface. After installation is complete, check whether
the screws are flush and rotate the propellers to check for any abnormal resistance.
Detaching the propellers
Use the screwdriver from the aircraft package to loosen the screws and detach the propellers
from the motors.
Marked Unmarked