DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 56)

DJI Mini 4 Pro User Manual
56
© 2023 DJI All Rights Reserved.
Landing Protection
Landing Protection will activate during RTH.
Landing Protection is enabled once the aircraft begins to land.
1. During Landing Protection, the aircraft will automatically detect and carefully land on
suitable ground.
2. If the ground is determined unsuitable for landing, the aircraft will hover and wait for pilot
confirmation.
3. If Landing Protection is not operational, DJI Fly will display a landing prompt when the
aircraft descends to 0.5 m from the ground. Tap confirm or push the throttle stick all the
way down and hold for one second, and the aircraft will land.
Precision Landing
The aircraft automatically scans and attempts to match the terrain features below during RTH.
The aircraft will land when the current terrain matches the Home Point. A prompt will appear in
DJI Fly if the terrain match fails.
• Landing Protection is activated during Precision Landing.
• The performance of Precision Landing is subject to the following conditions:
a. The Home Point must be recorded upon takeoff and must not be changed during
flight. Otherwise, the aircraft will have no record of the terrain features of the Home
Point.
b. During takeoff, the aircraft must ascend at least 7 m before moving horizontally.
c. The Home Point terrain features must remain largely unchanged.
d. The terrain features of the Home Point must be sufficiently distinctive. Terrain such
as a snow-covered field is not suitable.
e. The lighting conditions must not be too bright or too dark.
• The following actions are available during Precision Landing:
a. Press the throttle stick down to accelerate landing.
b. Movement of any other control stick apart from the throttle stick will be regarded
as giving up Precision Landing. The aircraft will descend vertically after the control
sticks are released. Landing Protection is still effective in this case.