DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 96)

DJI Mini 4 Pro User Manual
96
© 2023 DJI All Rights Reserved.
Switch to the
aircraft/remote
controller as the
center Tap to switch to aircraft/remote controller as the center of the
attitude indicator.
Aircraft
Orientation Indicates the aircraft orientation. When the aircraft is displayed as the
center of the attitude indicator and the user is changing the aircraft
orientation, all the other elements on the attitude indicator will rotate
around the aircraft icon. The arrow direction of the aircraft icon stays
unchanged.
Aircraft
Horizontal
Attitude Indicates the aircraft horizontal attitude information (including pitch
and roll). The deep cyan area is horizontal and in the center of the
attitude indicator when the aircraft hovers in place. If not, it indicates
that the wind is changing the aircraft attitude. Fly with caution. The
deep cyan area changes in real time based on the aircraft horizontal
attitude.
Switch to the
Mini Map Tap to switch from the attitude indicator to the mini map.
Collapse Tap to minimize the attitude indicator.
Home Point The location of the Home Point. To manually control the aircraft to
return home, adjust the aircraft orientation to point towards the
Home Point first.
Remote
Controller The dot indicates the remote controller location, while the arrow on
the dot indicates the remote controller orientation. Adjust the remote
controller orientation during the flight to make sure the arrow points
towards the aircraft icon for optimal signal transmission.
19. Auto Takeoff/Landing/RTH
/ : tap the icon. When the prompt appears, press and hold the button to initiate auto
takeoff or landing.
: tap to initiate RTH and have the aircraft return to the last recorded Home Point.
20. Waypoint Flight
: tap to enable/disable Waypoint Flight.
Collapse
switch to mini map
Aircraft Horizontal
Attitude
Home Point
Remote controller
switch to the remote
controller as the center
Aircraft Orientation
Aircraft as the Center Remote Controller as the Center
switch to the aircraft as
the center