DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 109)

DJI Mini 4 Pro User Manual
© 2023 DJI All Rights Reserved.
109
• The photos taken in Single Shot mode have no HDR effect in the following situations:
a. When the aircraft is moving or unstable due to high wind speeds.
b. When white balance is set to manual mode.
c. The camera is in Auto mode and the EV setting is adjusted manually.
d. The camera is in Auto mode and the AE lock is turned on.
e. The camera is in Pro mode.
• DJI Mini 4 Pro doesn't include a built-in fan, which effectively reduces the aircraft's
weight and increases the battery life. Meanwhile, it uses the wind generated by the
propellers to dissipate heat during the flight, ensuring heat dissipation to prevent
overheating. When DJI Mini 4 Pro stays in standby mode for a long time, its temperature
may continuously rise. The aircraft has a built-in temperature control system, when
in standby mode the aircraft can make intelligent judgments based on the current
temperature to better reduce the temperature. DJI Mini 4 Pro is added with an energy-
saving mode. When the temperature of the aircraft rises to a certain temperature, the
aircraft will enter the energy-saving mode. If the temperature of the aircraft continues
to rise, it will power off to prevent overheating.
You can see whether the aircraft is in energy-saving mode by the prompts in the aircraft
system status bar. Exit this mode by the following methods:
a. Tap settings in DJI Fly, and exit the energy-saving mode according to the prompt.
b. Start motors using the remote controller to exit the energy-saving mode.
In energy-saving mode, the user can only take photos and record videos, settings and
functions about flight are unavailable. Operate based on the prompts in DJI Fly.