DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 62)

DJI Mini 4 Pro User Manual
62
© 2023 DJI All Rights Reserved.
• Propeller blades are sharp. Handle with care.
• The screwdriver is only for mounting the propellers. DO NOT use the screwdriver to
disassemble the aircraft.
• If a propeller is broken, remove the two propellers and screws on the corresponding
motor and discard them. Use two propellers from the same package. DO NOT mix with
propellers from other packages.
• Only use official DJI propellers. DO NOT mix propeller types.
• Propellers are consumable components. Purchase additional propellers if necessary.
• Make sure that the propellers and motors are installed securely before each flight.
Check to make sure the screws on the propellers are tightened after every 30 hours of
flying time (approx. 60 flights).
• Make sure that all propellers are in good condition before each flight. DO NOT use
aged, chipped, or broken propellers.
• To avoid injury, stay away from rotating propellers or motors.
• To avoid damaging the propellers, place the aircraft correctly during transportation or
storage. DO NOT squeeze or bend the propellers. If propellers are damaged, the flight
performance may be affected.
• Make sure the motors are mounted securely and rotating smoothly. Land the aircraft
immediately if a motor is stuck and unable to rotate freely.
• DO NOT attempt to modify the structure of the motors.
• DO NOT touch or let hands or body parts come in contact with the motors after flight,
as they may be hot.
• DO NOT block any of the ventilation holes on the motors or the body of the aircraft.
• Make sure the ESCs sound normal when powered on.