DJI Mini 4 Pro Drone Fly More Combo Plus with RC 2 Controller - Manual (Page 70)

DJI Mini 4 Pro User Manual
70
© 2023 DJI All Rights Reserved.
-90°
0°
60°
Use the gimbal dial on the remote controller to control the tilt of the gimbal. Alternatively, do so
through the camera view in DJI Fly. Press and hold the screen until the gimbal adjustment bar
appears. Drag the bar up and down to control the gimbal’s tilt.
Tap the Landscape/Portrait Mode Switch in DJI Fly to switch between the two gimbal roll angles.
The roll axis will rotate to -90° when Portrait Mode is enabled, and back to 0° in Landscape
Mode.
Gimbal Operation Modes
Two gimbal operation modes are available. Switch between the different operation modes in
Settings > Control in DJI Fly.
Follow Mode: the angle of the gimbal remains stable relative to the horizontal plane. Users can
adjust the gimbal tilt. This mode is suitable for shooting stills.
FPV Mode: when the aircraft is flying forward, the gimbal synchronizes with the movement of
the aircraft to provide a first-person flying experience.
• Make sure there are no stickers or objects on the gimbal before taking off. DO NOT tap
or knock the gimbal after the aircraft is powered on. Launch the aircraft from open and
flat ground to protect the gimbal.
• After installing the wide-angle lens, unfold the arms before powering on the aircraft.
Make sure the gimbal is level and pointing forward before takeoff, so that the aircraft
can correctly detect the installation status of the wide-angle lens. The gimbal will be
level when the aircraft is powered on, if the gimbal rotates, recenter the gimbal using
the remote controller or DJI Fly as follows:
a. Tap Recenter Gimbal on the Settings > Control page of DJI Fly.
b. Press the Fn button on DJI RC-N2 remote controller or the Customizable C1 Button
on DJI RC 2 remote controller. The default function is recentering the gimbal or
pointing the gimbal downward, which can be customized.
• Pano and Asteroid functions will not be available after the wide-angle lens is installed.
• Precision elements in the gimbal may be damaged by a collision or impact, which may
cause the gimbal to function abnormally.
• Avoid getting dust or sand on the gimbal, especially in the gimbal motors.